![]() ![]() - At default settings with a battery inserted and the camera connected to an EH-73P charging AC adapter via a UC-E21 USB cable, the power (charge) lamp would not flash and the battery would not charge when the adapter was plugged in.- When users attempted to pair the camera with the smart device using the SnapBridge app under iOS 13, pairing would end in failure and a message to that effect would be displayed.See the camera manual for instructions on copying images from internal memory to a memory card. Be sure to back up images stored in the camera’s internal memory before updating the firmware. Images stored in the camera’s internal memory will be deleted when the firmware is updated. Read the information below before proceeding.You will not need to download or install this update if the firmware listed above is already installed. Before proceeding, select Firmware version in the camera Set up menu and check the camera firmware version. This service supplies software that can be used to update the firmware for COOLPIX B600 cameras to version 1.1. ![]() Be sure you understand the terms of the agreement before beginning download. By selecting “Accept” and clicking “Download”, you are held to have accepted the terms and conditions of the agreement. This software update program is for the customer-owned product listed above (the “affected product”), and is provided only on acceptance of the agreement listed below.
0 Comments
Leave a Reply. |